To release the memory from its slot, push down on the two side latches (circled below). Rotate the computer to the left so the memory is in the position shown below. You must remove the memory to gain access to the inverter. Locate the memory module(s) in the bottom right corner.
APPLE MAC G5 INSTALL
Warning: Always discharge static electricity before you touch any parts or install any components inside the computerģ. Touch the metal surface (as shown below) on the inside of the computer to discharge any static electricity. As you remove each module, set it aside, along with the screws for that module.
APPLE MAC G5 HOW TO
This procedure will show you how to remove and replace each module. To access the inverter other service modules have to be removed. Holding the back cover by the metal foot, tilt the cover up and lift it off th Don’t force the screws once they stop turning. Turn the screws to the left until they stop turning.
Using the tool provided, or a Phillips #2 screwdriver, loosen the three captive screws. Note: These screws are captive they are part of the display/bezel assembly and cannot be removed. You may have to lift the stand to locate the middle case screw. Locate the three silver case screws circled below. Hold the sides of the computer and slowly lay the computer face dĤ. Place a soft, clean towel or cloth on the desk or surface. Disconnect all cables, and unplug the power cord from your computer. Turn off your computer by choosing Shut Down from the Apple (K) menu. The models may look slightly different from one shown in the illustration however, the following procedure applies to both models. Opening the Computer Note: These instructions cover the iMac G5 (20-inch) models. The procedure will show you how to ground yourself. Ground yourself when working on the computer. Remove the gray plastic inverter cover before returning the inverter to Apple. A magnetized “L”-shaped Phillips screwdriver is included with the replacement part. Do not remove screws unless they are brass colored, or you will void your warranty. All customer removable screws are brass colored.
Multi-Mount is a trademark of New Concepts Development Corporation, registered in the U.S. These encounters result in 'bit flips' which can cause a various OS correctable errors, system crash, or worse, go uncaught by the system with the result of a corrupted data point. ECC Memory is able to correct errors caused by random neutrino partical encounters. ECC memory is recommended when using G5 as a high-performance server or for mission critical applications which require precision data with no error tolerance. In order to use ECC Memory in Power Mac G5 - all installed memory must be of the ECC Non-Registered type. Use of ECC Memory in 2005 G5 Optional.Īpple standard included non-ECC memory in 2005 Apple Power Macintosh G5 Models and offered ECC memory as an option.
0 kommentar(er)
